Husqvarna 440E vs Husqvarna 440: The Ultimate Chainsaw Comparison

Updated on
Contents show

Walts DIY is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

Husqvarna 440

Did you know that Husqvarna is a Swedish manufacturer that deals with outdoor powered tools? The Husqvarna 440E and Husqvarna 440 are two of the many tools this company produces. However, the two chainsaws are very similar even though the 440E is an upgrade of 440.

It has, therefore, made it challenging for buyers to decide on which is the best. In this article, we look at Husqvarna 440 vs. 440E and help you decide on the best. 

Take a look.

 

Husqvarna 440 (Best Value)

 

 

The Husqvarna 440 chainsaw is a gas-powered 18 inches chainsaw designed to cut trees effortlessly. The saw is 40.9cc and kicks out 2.4 hp power. It also has a 2-cycle design for more effortless functioning. The chainsaw is super beginner-friendly. It is effortless to use when making perfect cuts, even on hardwood trees.

The chainsaw is also very lightweight such that you can even carry it in a backpack. It’s designed with a 9000 rpm X Torg power engine. An X Torg power engine is more efficient as it saves fuel and reduces the emission of toxic gases. The saw is very easy to start requiring minimal effort to switch from start to stop.

Buy on Amazon

 

Husqvarna 440E (Best Overall)

Husqvarna 440E, on the other hand, is an advancement of the 440 models. It’s a super performer with a bar length of 16 inches. The 40.9 cc chainsaw works in 2 cycles for outstanding performance. The tool is powered by an X Torg motor, which saves fuel and limits the toxic gases produced.

The chainsaw is very lightweight and easy to use, making it a gem for beginners. It’s also super easy to start and stop. The saw is designed with a smart start, which requires minimal effort to activate.

Buy on Amazon

 

Further Reading: Best Chainsaw Chaps for the Money – Top 5 Reviews and Buyers Guide

 

What’s the difference between Husqvarna 440 and 440E?

These two chainsaws look identical, but a closer look at both will help you see that they are different in ways that make a big difference. 

Would you please take a look at some of the differences before we can rule out the best?

Adjustments

This refers to a minimal change in design. While the 440 requires the use of a T-wrench to adjust the chainsaw, the 440E has a toolless system in place. The 440 chainsaw comes with a tool that can slow you down as you need to find and fix the adjusting tool for it to work.

Features

The two chainsaws are feature-rich. Apart from the toolless system that comes with the 440E, all the other features of the two chainsaws are the same. Everything that comes with the 440 is the same in 440E. 

These chainsaws are very easy to use, very precise in their work, and extremely lightweight. The 440E model, however, is easier to use as it spares you the frustration of starting the saw thanks to the air purge system, which makes it easier to start without resistance, even in winter. 

They are an excellent choice for beginners as they do a great job bring down sizeable trees without the need to use more muscle.

Both chainsaws can work at a maximum speed of 9000 rpm, which is powerful enough to bring down small to medium trees. The saws are recommended for use on trees, which are no more than 18 inches in diameter. The 440E saw it has a 16 inches bar length while the older version is a bit bigger with an 18 inches bar length. 

When it comes to changing the blades, you can use anything between 13 inches and 18 inches for both saws.

husqvarna 440e

Another feature you will love is the visibility of the fuel tank capacity. You will know when you need a refill to avoid wasting time. The two chainsaws also have a kickback safety design, which has been specially developed to prevent accidents.

Performance

You will hear users say that there is no power output difference between the two chainsaws, and it’s partially true. The difference is mainly on paper because it’s so tiny you will hardly notice it. Both chainsaws use a 40.9 cc engine. The 440E has a power output of 2.41 hp, while the 440 has a 2.4hp power. Both saws are designed to consume the least fuel, reducing the harmful effects on the environment.

The Husqvarna 440E carries a total weight of 9.7 pounds, while the 440 counterpart is about 9.25 pounds. The weight difference is so negligible you will barely notice it. You can also cancel it out depending on the blades used in either o chainsaws. You will scarcely feel the differences you read on paper in use. The two saws are identical when it comes to performance.

Model age

Husqvarna 440E was designed to replace the older model, 440. Though the older model is sometimes better in design and built, it’s not the case with two chainsaws. 440E is a real improvement from the earlier model. It was designed to do away with all the imperfections of 440 and address customer complaints of the earlier version.

Price

The price of anything you are purchasing is always a great idea when you are comparing two items. Luckily for these two chainsaws, the price difference is insignificant. It could because the two saws are practically the same thing apart from the difference in adjustments and model age. The price, in this case, is not essential when deciding the best of the two chainsaws.

Which is the best?

Husqvarna 440 and 440E are identical save for the adjustment method. After a keen review, we can confidently recommend the 440E model. New brooms sweep cleaner! 

The 440E model is easier to use because it comes toolless. Also, the 440E was designed to supplant 440 in the market. Purchasing the older model will be more expensive to maintain as the spare parts will be challenging to find. 

If you are still bound to buy the 440 models, remember it has to be adjusted using a wrench. Ensure you are getting it at a steep discount; otherwise, you can always get the latest and better model.

Here are some other articles you may like:

The Husqvarna 435 Chainsaw Review

Husqvarna 128CD String Trimmer Review

Best Wood Lathe – Reviews and Buyers Guide

 

Walts DIY is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

Walter Snyder
Latest posts by Walter Snyder (see all)