These methods are perfect for cutting through even the most formidable plastic pipes with ease.
Walts DIY is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.
PVC pipe is one of the most versatile plastics, and its many different usages make it a must-have for any at-home or professional craftsman.
One of the main reasons that PVC pipe has become such a popular material in the building industry is its number of features. For one thing, PVC is resistant to corrosion and heat, making it perfect for outdoor projects. But it’s also lightweight and easy to work with. Plus, PVC pipe can easily be cut to size at home with just a few hand tools!
PVC pipes are used in many different settings and are often referred to as plumbing pipes. They are used as water containment plumbing systems in locations like the United States, with scorching weather.
Cutting PVC tube can be difficult without the right tool. Luckily, there are a few ways you can cut PVC pipes quickly and easily. Here are three of our favorite methods for cutting through even the most rigid pipes with ease!
- PVC cutter
- Miter saw
Let’s explore each one in more detail.
Use a PVC Pipe Cutter
A PVC pipe cutter is one of the quickest and easiest ways to cut a piece of PVC pipe. In fact, with this cutting tool, you may even be able to make a straight cut every time!
Here’s how it works: When positioning your pipe in the cutter, be sure that it is flush with the bottom edge of the tool. This will ensure that you end up with a straight cut rather than an angled one. Then, pull on each handle and watch as your pipe is easily split in half.
Placing the pipe flat on a workbench will ensure that you start with a straight cut and end up with the same.
Using a plastic pipe cutter is the quickest way to cut through your pipes, and since it only requires one tool, it’s also the easiest. If you’re looking for something that cuts fast but still delivers high-quality cuts, this is a must-have in your arsenal of hand tools!
The majority of people use a squeeze-style cutter to cut PVC pipe. This is only capable of cutting pipes that are smaller than 2 inches in diameter. For larger pipes, say 4-inch diameter, a rotary tool is needed, but they are a lot more expensive.
Use a Hacksaw to Cut PVC Pipe
Another easy way to cut PVC pipe is by using an ordinary handsaw or hacksaw blade. If you’re looking for a tool that produces quick, accurate cuts with every use, this is your best bet!
However, if you’d like to cut your pipes as accurately as possible, here’s how: First, position the tube so that it is flush with the edge of the tool. Then use your free hand to hold the pipe steady, and pull hard on each end of the saw. This will cause the blade to make a clean cut through the PVC.
Since a hacksaw will be able to handle even 4-inch diameter pipes, you’ll be able to use it for more than just home improvement projects.
Cutting a piece of PVC pipe with a hacksaw is quick and easy as long as your saw blade is sharp. However, if you want to cut it perfectly straight every time, be sure to hold the pipe in place before you start cutting.
A miter box is a tool that can help to make straight cuts to PVC pipes using a hacksaw. PVC pipes are often used in building construction and come in large diameters, such as 1.5 inches. Because of this, it is difficult to cut them using a hand saw without having the risk of an inaccurate or jagged cut.
To make straight cuts with a hacksaw on PVC pipes using a miter box, begin by marking the PVC pipe with a marker or pencil to designate where you will cut.
Using one of the markings as a point of reference, place the PVC pipe in the miter box at an angle that creates 90 degrees between it and the long side of the miter box.
Slowly saw through it, using back and forth motions. As you are cutting down into the PVC piping, be careful not to let any side of the saw cut past the edge of the miter box, or you will end up with an inaccurate or jagged cut.
Continue to saw through the PVC pipe until you have reached your desired length, reviewing your measurements as you work to make sure that they are accurate and align them with each other.
When you have finished cutting your PVC pipe, clean away any excess plastic that has been shaved off. Once you have removed the excess, fit the PVC pipe into your structure as needed.
To make sure that it fits perfectly, use your ruler to measure and check for an accurate fit before connecting it with glue or a PVC cement of some kind.
Cut Your PVC Pipe with a Miter Saw
A miter saw is a highly specialized power tool that can cut through thick pieces of PVC pipe with ease. With the use of this type of power-cutting device, you will be able to make much more accurate and straight cuts than if you were to cut it by hand with a hacksaw.
Here’s how: Place your PVC tubing in the miter box at a 90-degree angle or straight across from one of the long sides. Adjust the PVC pipe so that it is flush with the fence of your miter saw tool.
Line up the blade with the cut mark you made earlier for a more accurate and straight cut.
Power on the miter saw, place your free hand at the end of the pipe to make sure that it is steady and will not move during cutting. Using your other hand, pull the trigger on the saw to power your cutting blade through it.
Continue to use back-and-forth motions until the PVC pipe is cut off at your desired length. If it doesn’t cut through the first time, turn off the blade, twist the pipe, and try again until it cuts clear through.
Be sure to remove any excess plastic that has been shaved off using a filament or utility knife. You’ll want to make sure you have a smooth surface for your PVC pipe to fit perfectly into where it needs to go when you begin construction on whatever project you’re working on.
How to Clean Burrs Off of a Cut Pipe
The edges on cut PVC pipes are often rough and jagged, making them difficult to shove into connectors. If left in this state, it could also be a hazard for people who touch it after installing it. There is an easy way to smooth the edges of the pipe before you begin using it.
Begin by getting your hands on a smooth file or piece of 120-grit sandpaper that has been folded in half.
Hold the end of the pipe under running water while using either one to smooth out the rough edges and burrs that are cut into it. Be sure to hold it firmly as you do this so that it will not bend or break.
After this procedure has been completed, the plastic pipe should fit easily into the connectors that you’re planning to use with it.
Another easy way is using a utility knife. The blade should be sharp, and it should cut quickly and evenly as well.
Try running your finger along the edge after cutting to ensure that there aren’t any rough edges left behind, then use a rag or something similar to clean any leftover plastic from the cut edges.
Here are some other articles you may like:
Here are our favorite PVC Pipe Cutters
CLICK any image to see Ratings & Reviews on Amazon
|Top||RIDGID 23498 Pipe Cutter||Buy Now||4.9 / 5 (Best Overall)|
|Zantlea Pipe and Tube Cutter||Buy Now||4.8 / 5 (Best Value)|
|Libraton PVC Pipe Cutter||Buy Now||4.7 / 5|
|DEWILL Ratchet-type Pipe and PVC Cutter||Buy Now||4.7 / 5|
|AIRAJ Ratchet-type Pipe PVC Cutter||Buy Now||4.6 / 5|
|"YIYITOOLS PVC Cutter||Buy Now||4.6 / 5|
|Ratchet-type PVC Pipe Cutter||Buy Now||4.5 / 5|
|N/C Ratchet Tube Cutter||Buy Now||4.5 / 5|
|THINKWORK Ratchet-type Pipe Cutters||Buy Now||4.5 / 5|
|GETUHAND Ratchet-type PVC Pipe Cutters||Buy Now||4.4 / 5|